How do I draw a cabinet with a curved edge?
Drawing and modules · Last updated:
Short answer
Open the module in design mode, go to the Carcass tab of Options and, in the Curved Edge section, turn on “Left front corner curved” or “Right front corner curved”. Type the radius and the straight part in mm.
Step by step
- Double-click the module to enter design mode and open “Options” from the rail on the left.
- On the Carcass tab, scroll down to the Curved Edge section.
- Turn on the “Left front corner curved” or “Right front corner curved” switch.
- Type the Radius (at least 20 mm) and the Straight part (at least 40 mm).
- Choose a cutter from your tool library in the Kerf cutter list; the number and spacing of kerfs adjust to it on their own. If you do not choose a cutter, you enter the Kerf spacing and Kerf width by hand.
The curved side is cut as one piece and bent with the kerfs on its inner face; the panels and worktop come out radiused at that corner. Curves are only made on the front corners.
Related questions
Was this answer helpful?
